How to Install Brick Slips for a Durable and Stylish Wall Finish

Any homeowner who wants to infuse their living space with elegant and rural flavour should consider brick slips as an installation option. Brick slips provide homeowners the chance to achieve authentic brick wall aesthetics while building only part of actual brick construction. You can easily instal brick slips due to their durability and they create attractive accents in all areas. This guide teaches you the professional steps required to instal brick slips for any space including living rooms, kitchens and outdoor walls.

What You’ll Need Before you start, gather these materials:

• Brick slips (pre-cut thin bricks)

• Adhesive (suitable for brick slips)

• Notched trowel

• Spacers

• Spirit level

• Tile cutter or angle grinder

• Jointing mortar

• Pointing trowel

• Sponge and cloth

Step 1: Prepare the Wall

The first step requires a smooth clean wall surface that is dry and shows no signs of instability. A thorough cleaning should be performed on dusty or flaky walls followed by dry time before continuing. Using a primer as an adhesive booster will lead to optimal results. A smooth wall surface becomes more grip-prone when you apply a light sandpaper scoring.

Step 2: Plan Your Layout

You should arrange your brick slips on the floor first to select the preferred layout before commencing installation. You can determine the placement fit while checking for any necessary modifications through this technique. Leave 10mm distance gaps between each brick slip because these spaces will become mortar joints.

Step 3: Apply Adhesive

A notched trowel enables you to apply an adhesive layer across the wall surface. Your first step should begin at the bottom section before moving upward. Keep your application amounts controlled since the adhesive needs short drying times. Press each brick slip into its position using appropriate spacers for maintaining equal spacing between the bricks.

Step 4: Cut to Fit

When you reach the edges or corners, you might need to cut some brick slips to size. Tile cutters or angle grinders work best. Protect yourself from dust with safety eyewear and a mask.

Step 5: Check Alignment

After every few rows, use a spirit level to make sure everything is straight. Adjust if needed before the adhesive sets.

Step 6: Apply Mortar

Once the adhesive has dried (usually 24 hours), it’s time to fill the gaps. Use a pointing trowel to push jointing mortar into the spaces between the brick slips. Smooth it out for a clean, professional finish.

Step 7: Clean Up

Before the mortar fully sets, use a damp sponge to wipe away any excess. This prevents hard-to-remove stains later. Let everything dry completely before touching up any areas.

Enjoy Your New Brick Wall!

And that's it! The application of your brick slip wall produces a beautiful outcome that bestows elegance and charm to your living area. The choice of standard red brick or contemporary whitewashed appearance will bring timeless appeal with long-lasting durability through brick slips to your home.